If you have questions or require advice about the 7000 Series Hedge Cutter, or any of our other products, then contact us today.
Dealer Locator
Over 324 dealers world wide, contact your nearest dealer
View all
The 7000 Series hedge and verge cutter range has been designed hand in hand with owner driver contactors over the last 20 years, it’s range of specifications and configurations makes it suitable for both farmers and contractors.
Three models are available: 7060T 6m Telescopic machine,7065T 6.5m Telescopic machine and 7062VFR 6.2m variable forward reach machine.
The 7060T is a telescopic machine with a retracted reach of 4.80M and a maximum reach of 6.0M when fully extended. This gives the trimmer a compact design without comprise to its reach and therefore is ideal for narrow lane work.
The hydraulic system has been developed to run with high pressure & low flow to reduce the pressure drops throughout the system which in turn generates less heat and maintains maximum power to the cutting head.
| 70HP hydraulic system |
| Digital proportional joystick control |
| Oil Cooler with fan |
| Head Float |
| Arm float |
| Auto-reset break back |
| GP1200 1.2m Belt drive head (LH) |
| Bolted adjustable head roller |
| Parallel arm geometry |
| LED road lights |
| Parking stands / forklift shoes |
| Transport safety stop |
The 7065T is a telescopic machine with a retracted reach of 5.4M and a maximum reach of 6.5M when fully extended. This gives the trimmer a compact design without comprise to its reach and therefore is ideal for narrow lane work.
The hydraulic system has been developed to run with high pressure & low flow to reduce the pressure drops throughout the system which in turn generates less heat and maintains maximum power to the cutting head.
| 70HP hydraulic system |
| Digital proportional joystick control |
| Oil Cooler with fan |
| Head Float |
| Arm float |
| Auto-reset break back |
| GP1200 1.2m Belt drive head (LH) |
| Bolted adjustable head roller |
| Parallel arm geometry |
| LED road lights |
| Parking stands / forklift shoes |
| Transport safety stop |
The 7062VFR is a Variable forward reach machine which can be operated with the arm straight to give maximum reach of 6.2M or up to 1.60M forward for improved visibility and operator comfort. There is also 0.9m of backwards reach for narrow lanes.
The hydraulic system has been developed to run with high pressure & low flow to reduce the pressure drops throughout the system which in turn generates less heat and maintains maximum power to the cutting head.
| 70HP hydraulic system |
| Digital proportional joystick control |
| Oil Cooler with fan |
| Head Float |
| Arm float |
| Auto-reset break back |
| GP1200 1.2m Belt drive head (LH) |
| Bolted adjustable head roller |
| Parallel arm geometry |
| LED road lights |
| Parking stands / forklift shoes |
| Transport safety stop |
GP1200 (1.2m) General Purpose head suitable for grass or multi-year hedge growth. Standard on all 7000 & 8000 trimmers.
Options:
| Cutting Width 1.2m |
| Low Profile |
| Double Skinned |
| Rotor Diameter 120mm |
| Roller Diameter 125mm |
| Twin Vee Drive (LH Only) |
| Quick Hitch Fixed Mounting |
| Double Spiral Flail Pattern |
| 24 x Drop Forged Flails |
| T or Competition Flails |
| Snag Free Corners / Guards |
| Weight - 360Kg |
GP1500 (1.5m) General Purpose head suitable for grass or multi-year hedge growth. Optional head on all 7000 & 8000 trimmers.
Options:
| Cutting Width 1.5m |
| Low Profile |
| Double Skinned |
| Rotor Diameter 120mm |
| Roller Diameter 125mm |
| Twin Vee Drive (LH Only) |
| Quick Hitch Fixed Mounting |
| Double Spiral Flail Pattern |
| 30 x Drop Forged Flails |
| T or Competition Flails |
| Snag Free Corners / Guards |
| Weight - 400Kg |
The HC 1200 (1.2m) flail head is a high capacity head for single pass cutting and is suitable for 7000 & 8000 Series trimmers.
Options:
| Cutting Width 1.2m |
| Sleek Design |
| Double Skinned |
| Ultra Heavy Duty |
| Rotor Diameter 150mm |
| Roller Diameter 125mm |
| Twin Vee Drive |
| 60mm Rotor Bearing |
| Fixed Mounting |
| Double Spiral Flail Pattern |
| 30 x Drop Forged Flails |
| T or Competition Flails |
| Weight - 425Kg |
The HC 1600 (1.6m) flail head is a high capacity head for single pass cutting and is suitable for 7000 & 8000 Series trimmers.
Options:
| Cutting Width 1.6m |
| Sleek Design |
| Double Skinned |
| Ultra Heavy Duty |
| Rotor Diameter 150mm |
| Roller Diameter 125mm |
| Twin Vee Drive |
| 60mm Rotor Bearing |
| Fixed Mounting |
| Double Spiral Flail Pattern |
| 36 x Drop Forged Flails |
| T or Competition Flails |
| Weight - 500Kg |
The digital proportional joystick is the standard control system for the 7000 Series trimmer. The Main functions of the joystick are fully programmable to suit individual operators.
| Proportional Lift, Reach & Head Angling |
| Programmable Joystick Control |
| Electric Start Bi-Direction Rotor |
| Switched Electric Slew & Telescopic |
| Electric Float Engagement |
| Auto Break Back / Reset |
| LCD Screen |
| Hour Counter |
| Easy Mount Seat Bracket |
The 70hp system runs with high oil pressure with a low flow rate which equates to constant power to the flail.
The operation of the joystick can be adjusted to suit the individual operator.
The oil cooler helps to maintain the oil temperature. The auto reverse feature prevents material build up which will reduce air flow.
The standard GP1200 1.2m
This is only available with a left hand belt drive.
This provides a safety stop whilst in transport and protection to the tractor cab.
The arm float uses an accumulator system to provide movement to the arm when operating on the ground.
The auto break back feature helps maintain the slew position of the arm.
Full LED lights provide longevity & good visibility to oncoming traffic. With Steel guard for extra protection.
The parking stands allow for stable storage when the trimmer is not attached to a tractor.
The fork lift shoes allow the trimmer to be moved with ease using a handler or fork lift truck.
Axle Mounting Sub Frame
This detachable frame connects the trimmer to the axle brackets on the tractor. It connects to the trimmer main frame using two pins.
Axle Brackets
A range of axle brackets are available to fit most modern tractors
Read more
4 Point Stabiliser Frame
This is an adjustable frame that helps to stabilize the offset weight of a trimmer when fitted to the tractors 3 point linkage. A drawbar stabilizer is also included to be used in conjunction with the 3 point stabilizer frame as an additional link.
Hydraulic Roller
This allows the position of the head roller to be controlled hydraulically using the tractors spool valve. The roller can still be bolted into position if desired.
Read more
Hydraulic Nose
Hydraulic nose controlled via the tractor spool valve.
Read more
Narrow Lane Bracket
This enables the operator to tilt the head hydraulically using a tractor spool valve to enable vertical hedge side trimming in restricted areas.
Read more
7000 Series Highway Kit
This incorporates a reflective chevron graphics package, magnetic arrow & 180 degree strobe light for maximum highway visibility
Read more
Debris Blower
A tractor spool valve operated hydraulic fan used for blowing hedge cuttings off of a hard smooth surface
Read more
85 HP High Power Hydraulic System
Recommended for use where greater workrates are required in larger growth, available with either 540rpm or 800rpm pto input
Read more
Verge Head Kit
Incorporates re-enforced hardened steel skid and larger 6” diameter roller
Read more
Twin Accumulator Float
This adds a second accumulator to the standard single accumulator float
Read more
HC - High Capacity Flail Head
Available in lieu of the standard GP1200 1.2m flail head, the HC1200 1.2m or HC1600 1.6m.
GP1500 Flail Head
Available in lieu of the standard GP1200 1.2m flail head, the GP1500 1.5m head features 30 flails.If you have questions or require advice about the 7000 Series Hedge Cutter, or any of our other products, then contact us today.
| Technical Specifications | 7060T | 7065T | 7062VFR |
|---|---|---|---|
| Controls | |||
| Electronic Joystick Control | Standard | Standard | Standard |
| Hydraulics | |||
| Oil Capacity | 190 litres | 190 litres | 190 litres |
| Independent Hydraulics | Standard | Standard | Standard |
| Oil Cooler | Standard | Standard | Standard |
| Arm Features | |||
| Parallel Boom Geometry | Standard | Standard | Standard |
| Boom type | Telescopic | Telescopic | VFR |
| Hydraulic Slew | 102 deg | 102 deg | 102 deg |
| Arm Break Back | Standard | Standard | Standard |
| Head Float | Standard | Standard | Standard |
| Arm Float | Standard | Standard | Standard |
| GP1200 1.2m LH Drive Head | Standard | Standard | Standard |
| Drive System flow | 100 l/min | 100 l/min | 100 l/min |
| Drive System Pressure | 275 bar | 275 bar | 275 bar |
| Head Angling | 250 deg | 250 deg | 250 deg |
| Weights | |||
| Machine Weight inc head & oil | 1750kg | 1800kg | 1800kg |
| Min Tractor Weight | 4250kg | 4250kg | 4500kg |
| Min Tractor | 90HP | 90HP | 100HP |
| Mounting System | |||
| 4pt Mounting | Optional | Optional | N/A |
| Axle Mounting | Optional | Optional | Recommended |
| Accessories | |||
| Road Lights | Standard | Standard | Standard |
|
Warning: It is the customers responsibility to ensure that they do not exceed the tractor OEM (original equipment manufacturers) specification for implement mounting and hitch capability and that the trimmer installation is technically appropriate based on the weight and size of the tractor and its implement attachment system.
|
|||
| REACH DIMENSIONS | 7060T | 7065T | 7062VFR | ||||
|---|---|---|---|---|---|---|---|
| Retracted | Extended | Retracted | Extended | Straight | Forward | Backwards | |
| Max reach (A) head horizontal | 4.99m | 6.13m | 5.39m | 6.53m | 6.15m | 5.56m | 5.90m |
| Max reach (B) head vertical | 4.83m | 5.97m | 5.23m | 6.37m | 6.00m | 5.41m | 5.75m |
| Max height (C) head vertical | 6.05m | 6.91m | 6.42m | 7.29m | 7.03m | 6.60m | 6.86m |
| Max height (D) head horizontal | 5.08m | 5.93m | 5.42m | 6.29m | 6.06m | 5.69m | 5.89m |
| Max reach (E) downwards | 3.42m | 4.50m | 3.71m | 4.90m | 4.69m | 4.09m | 4.42m |
| Min siding width (F) to tank | 2.30m | N/R | 2.3m | N/R | 2.55m | N/R | 2.46m |
| Min siding width (G) to centre | 1.30m | N/R | 1.3m | N/R | 1.47m | N/R | 1.35m |
| Height (H) to pivot | 1.55m | 1.55m | 1.55m | 1.55m | 1.55m | 1.55m | 1.55m |
|
All dimensions above with 1.2mt head (7062 VFR 1.6m Forward & 0.90m Backward)
|
|||||||
Looking for something specific?
Search our support area for individual model set-up guides and more...
The 7000 series trimmer can either be set up for axle bracket or 4pt mounted. This can be changed by bolt on parts.
However it is recommended that the 7062VFR is axle mounted.
Yes, the flails are arranged in a double spiral which gives a better cut finish and ejects significantly less debris to the side
The standard system produces 70HP using Shelbourne high pressure hydraulic system on all 7000 & 8000 Series, an 85HP hydraulic system is optional extra
The 4pt stabiliser is a combination of a 3pt stabiliser frame with an under tank drawbar stabiliser, giving 4 main points attaching the trimmer to the tractor
All 7000 series machines are specified with durable drop forged flails as standard, these are available in either “T” or Competition configuration
