If you have questions or require advice about the 6000 Series Hedge Cutter, or any of our other products, then contact us today.
Dealer Locator
Over 324 dealers world wide, contact your nearest dealer
View allThe 6000 Series hedge and verge cutter range has been developed by utilizing some of the key features from both the 7000 & 8000 series to create a trimmer range with high specifications as far as performance but maintain a suitable weight to operate on medium sized tractors. This range is therefore suited to both farmers and contractors.
Two models are available: 6056 5.6m Fixed boom machine & 6060T 6m Telescopic machine.
The 6056 trimmer is fitted with a fixed boom giving a maximum reach of 5.60M. Suited to operations such as verge mowing or when operating on medium sized tractors where overall weight is critical.
Many of the features have come directly from the larger trimmers such as the 70hp hydraulic system and the GP1200 head therefore making the model suited both to the farmer and contactor.
70HP hydraulic system |
Parallel boom geometry |
Digital Proportional Joystick |
Oil cooler with fan |
GP1200 Flail Head (LH) |
Heavy duty 4 point stabilizer frame |
Bolted adjustable head roller |
Cable control rotor drive |
LED road lights |
Parking stands / forklift shoes |
The 6060T is a telescopic machine with a retracted reach of 4.80M and a maximum reach of 6.0M when fully extended. This gives the trimmer a compact design without comprise to its reach and therefore is ideal for narrow lane work.
Many of the features have come directly from the larger trimmers such as the 70hp hydraulic system and the GP1200 head therefore making the model suited both to the farmer and contactor.
70HP hydraulic system |
Parallel boom geometry |
Digital Proportional Joystick |
Oil cooler with fan |
GP1200 Flail Head (LH) |
Heavy duty 4 point stabilizer frame |
Bolted adjustable head roller |
Cable control rotor drive |
LED road lights |
Parking stands / forklift shoes |
GP1200 (1.2m) General Purpose head suitable for grass or multi-year hedge growth. Standard on all 6000, 7000 & 8000 trimmers.
Options:
Cutting Width 1.2m |
Low Profile |
LH Drive |
Double Skinned |
Rotor Diameter 110mm |
Roller Diameter 125mm |
Twin Vee Drive |
50mm Rotor Bearing |
Fixed Mounting |
Double Spiral Flail Pattern |
24 x Drop Forged Flails |
T or Competition Flails |
Weight - 360Kg |
GP1500 (1.5m) General Purpose head suitable for grass or multi-year hedge growth. Optional head on all 6000, 7000 & 8000 trimmers.
Options:
Cutting Width 1.5m |
Low Profile |
LH Drive |
Double Skinned |
Rotor Diameter 120mm |
Roller Diameter 125mm |
Twin Vee Drive |
50mm Rotor Bearing |
Fixed Mounting |
Double Spiral Flail Pattern |
30 x Drop Forged Flails |
T or Competition Flails |
Weight - 400Kg |
The HC 1200 (1.2m) flail head is a high capacity head for single pass cutting and is suitable for 7000 & 8000 Series trimmers.
Options:
Cutting Width 1.2m |
Sleek Design |
Double Skinned |
Ultra Heavy Duty |
Rotor Diameter 150mm |
Roller Diameter 125mm |
Twin Vee Drive |
60mm Rotor Bearing |
Fixed Mounting |
Double Spiral Flail Pattern |
30 x Drop Forged Flails |
T or Competition Flails |
Weight - 425Kg |
The electric proportional joystick is the standard control system for the 6000 Series trimmer. The Main functions of the joystick are programmable to suit individual operators.
Proportional Lift & Reach Functions |
Programmable Joystick |
Switched Electric Head Angle & Slew Functions |
Switched Electric Telescopic (6060T) |
Cable Start Bi-Direction Rotor |
Optional Electric Float Engagement |
Easy Mount Seat Bracket |
This is an adjustable frame that helps to stabilize the offset weight of a trimmer when fitted to the tractors 3 point linkage. A drawbar stabilizer is also included as an additional link to the 3 point.
The standard 1.2M head can be fitted with either an inboard or outboard drive.
The 70hp system runs with high oil pressure with a low flow rate which equates to constant power to the flail.
The parking stands provide good stability when the trimmer is statically parked.
The fork lift brackets allow to easy movement of the trimmer when not attached to a tractor.
Programmable controls giving proportional control over both lift & reach functions, then switched electric on head angle and slew. This enables the operator to adjust the controls to their personal preference
Full LED lights provide longevity & good visibility to oncoming traffic.
Thermostatically controlled to prevent oil from becoming over-heated, improve performance and prolong oil life
This provides a safety stop whilst in transport and protection to the tractor cab.
If you have questions or require advice about the 6000 Series Hedge Cutter, or any of our other products, then contact us today.
Technical Specifications | 6056 | 6060T |
---|---|---|
Controls | ||
Electronic Proportional Joystick Control | Standard | Standard |
Rotor Control | Cable | Cable |
Hydraulics | ||
Oil Capacity | 190 litres | 190 litres |
Independent Hydraulics | Standard | Standard |
Oil Cooler | Standard | Standard |
Arm Features | ||
Parallel Boom Geometry | Standard | Standard |
Boom Type | Fixed | Telescopic |
Hydraulic Slew | 102 deg | 102 deg |
Arm Break Back | Standard | Standard |
Head Float | Optional | Optional |
Arm Float | Optional | Optional |
Flailhead Features | ||
Twin 'v' Belt Head System | Standard | Standard |
GP1200 Head (LH) | Standard | Standard |
GP1500 Head (LH) | Optional | Optional |
HC1200 Head | Optional | Optional |
Drive System Flow | 100 l/min | 100 l/min |
Drive System Pressure | 275 bar | 275 bar |
Head Angling | 250 deg | 250 deg |
Roller Diameter | 125mm | 125mm |
Hydraulic Roller | Optional | Optional |
Weights | ||
Machine Weight inc Head & Oil | 1640Kg | 1780kg |
Min Tractor Weight | 4000kg | 4250kg |
Min Tractor | 90HP | 95HP |
Mounting System | ||
4pt Mounting | Standard | Standard |
Axle Mounting | Optional | Optional |
Accessories | ||
LED Road Lights | Standard | Standard |
Warning: It is the customers responsibility to ensure that they do not exceed the tractor OEM (original equipment manufacturers) specification for implement mounting and hitch capability and that the trimmer installation is technically appropriate based on the weight and size of the tractor and its implement attachment system.
|
REACH DIMENSIONS | 6056 | 6060T | |
---|---|---|---|
Retracted | Extended | ||
Max reach (A) head horizontal | 5.62m | 4.99m | 6.13m |
Max reach (B) head vertical | 5.47m | 4.83m | 5.97m |
Max height (C) head vertical | 6.75m | 6.05m | 6.91m |
Max height (D) head horizontal | 5.63m | 5.08m | 5.93m |
Max reach (E) downwards | 4.2m | 3.42m | 4.5m |
Min siding width (F) to tank | 2.36m | 2.3m | N/R |
Min siding width (G) to centre | 1.28m | 1.3m | N/R |
Height (H) to pivot | 1.55mt | 1.55mt | 1.55mt |
All dimensions above with 1.2mt head (RH) Inboard drive
|
Looking for something specific?
Search our support area for individual model set-up guides and more...
All 6000 machines can be either 4 point linkage or axle mounted but are not dedicated either way.
Yes, the flails are arranged in a double spiral which gives a better cut finish and ejects significantly less debris to the side
The 4pt stabiliser is a combination of a 3pt stabiliser frame with an under tank drawbar stabiliser, giving 4 main points attaching the trimmer to the tractor
All 6000 series machines are specified with durable drop forged flails as standard, these are available in either “T” or Competition configuration
Since 1972, Keith Shelbourne formed Shelbourne Reynolds Engineering Ltd, designing and manufacturing farm machinery in Suffolk, England.
Read moreBy: Shelbourne Reynolds
By: Shelbourne Reynolds
By: Shelbourne Reynolds
By: Shelbourne Reynolds
By: Shelbourne Reynolds
By: Shelbourne Reynolds